SPECIFICATIONS
OpenVox IX160/160P is a standard 19” 1U high-performance PBX solutions. Designed and rigorously tested for optimal performance, this appliance allows users to integrate up to 2 pieces of OpenVox PCI-E telephony interface cards, with any combinations of FXS/FXO, BRI, E1/T1/J1 or transcoding interfaces.
The IX160/160P adds support for i3 and i5 motherboards to provide more powerful performance and can handle up to 600 concurrent calls and thousands of user extensions. In addition, IX160/160P can integrate a variety of high-definition audio/video codecs, bringing users a high-fidelity, high-definition audio/video call experience.
The IX160/160P supports comprehensive protocol conversion, including SIP, IAX2 protocols in IP side and BRI, PRI, SS7, R2 in CPE side. Taking the full advantages of open source platform, the IX160/160P will be preloaded with OpenVox UC system, Issabel, FreePBX, VitalPBX, PBX in a Flash, Elastix® IPPBX software. The optional pre-installed OpenVox UC system makes the deployment, configuration, and use of a PBX system ever easier. Getting started is a breeze with a user-friendly GUI. Powerful IX devices allow enterprises to grow while minimizing communication costs.
OpenVox IX160/160P is a risk-free solution with built-in Redundant Power Supply (RPS) and Uninterruptible Power Supply (UPS) that keeps your system and data away from damage or lost caused by unexpected power failure. The optional hardware RAID 1 support provides better data backup for your system. When RAID1 is installed, thus users can see the status of the storage devices and be alerted when hard drive(HDD/SSD) is crashed, then simply replace a backup hard drive ASAP.
| IX160/160P | ||||
| Models | IX160 | IX160P | ||
| CPU | 1.83GHz Intel(R) Celeron(R) N2930 | 3.20 GHz Intel(R) i5 | ||
| RAM | Up to 8GB DDR3L 1333 | Up to 32GB DDR4 2400 | ||
| Storage | MSATA SSD and 2.5 inch SATA HDD | |||
| Max Analog Ports | 48 | |||
| Max BRI Ports | 8 | |||
| Max E1/T1/J1 Ports | 4 | 16 | ||
| Recommended User Capacity | 200 | 1200 | ||
| Max Concurrent Calls* | 600 Concurrent Calls with G.711 Codec, 200 Concurrent Calls with G.729 Codec |
1600 Concurrent Calls with G.711 Codec, 800 Concurrent Calls with G.729 Codec |
||
| Recommended Call Capacity | 120 Calls | 600 Calls | ||
| NIC | 2* 10/100/1000M | |||
| Display | HDMI | |||
| USB | 2 USB2.0 | 2 USB3.0 | ||
| Power Supply | 100-240V AC | |||
| Power Consumption | 20W | 60W | ||
| Dimension | 440*335*44mm | |||
| Net Weight | 4127g | |||
| Operating Temperature | 0°C ~ 50 °C | |||
| Storage Temperature | -40 °C ~ 125 °C | |||
| Humidity | 10 ~ 90% NON-CONDENSING | |||
*Maximum number of calls tested under laboratory conditions
Technical Specifications
- Protocol: SIP (RFC3261), IAX2
- Transmission protocol: UDP, TCP, TLS, SRTP
- Codec: G711 (alaw/ulaw), G722, G723.1 G726, G729, GSM, ADPCM, iLBC, H263, H263P, H264
- DTMF: In-band, RFC2833, SIP INFO
- IP Services: static IP, DHCP, VPN, firewall, PPPoE, bridging
- Firewall: Yes
- T.38 Fax: Yes
- UPS: Yes (Optional)
- RAID: Yes (Optional)
- Redundant Power Supply: Yes (Optional)
Typical Applications
- Optional Pre-loaded Free Open Source IPPBX System
- Combination of FXS/FXO, BRI, E1/T1/J1 Interface
- PRI/SS7/R2 to SIP Gateway
- PRI/SS7/R2/FXS/FXO/BRI Signaling Converter
- PRI/SS7/R2 TDMoE Gateway
- Flexible Applications Selection (IPPBX or Firewall)
- Zero Touch Provisioning
- User Control Panel
Combination Options
- A400E/A(E)810E/A(E)1610E/A(E)2410E
- B(E)200E/B(E)400E
- D(E)130E/D(E)230E/D(E)430E/D(E)830E/D(E)1630E
Except A400E, all compatible cards can be applied together with EC module.
IX160/160P supports combination of two cards, for example:
- A(E)1610E + B(E)400E
- D(E)430E + B(E)400E
- D(E)430E+A(E)2410E
- D(E)430E + A(E)1610E
- A(E)810E + A(E)810E
Software & Platform:
- OpenVox UC system, Issabel，FreePBX，VitalPBX，Elastix，BrikerPBX
Note: The OpenVox UC system has not yet been adapted to the telephony card, if you need to install the telephony cards, please use other system such as FreePBX/Issabel.